Remote Registration
Utility
Apply the serial number from a
remote location via telnet.
In some instances you may need to
apply the serial number from a remote location. The Georgia SoftWorks Remote
Registration Utility provides the capability. This can be done when upgrading to
a new version or permanently activating a trial version of the software.
Syntax is:
GS_RR serial_number
Where serial_number is the serial number is
obtained from Georgia SoftWorks.
NOTE: You
must have telnet connectivity to the server, either during the trial
period or an already registered installed copy.
To run the Remote Registration
utility:
1.
Send the Product ID to Georgia SoftWorks as defined on page 6
.
2.
Georgia SoftWorks will email or fax the serial number back to you. The
serial number will look something like: D25EEAF8AF1692EB0F9A5DE28520FD8407F8632CC5D8
3.
Connect to the Server via telnet that you want to register.
4.
Change to the telnet installation root folder. This is the folder where
the telnet server was installed.
5.
Run the Remote Registration Utility.
Example:
Remote REGISTRATION VIA Telnet.
At the command prompt enter:
gs_rr
D25EEAF8AF1692EB0F9A5DE28520FD8407F8632CC5D8
and press <ENTER>.
You will receive a Banner
String followed by three dots. The text wait is displayed while the serial
number is being validated.
Upon completion the message "Registration
Successful" will be displayed.
